Home » Art & Craft DIY » Dangling Crystal Hoops – DIY
Dangling crystal hoops

Dangling Crystal Hoops – DIY

An elegant pair of crystal hoops can be made with two kinds of crystal beads, seed beads and using basic earring making techniques.

Dangling crystal hoops

Supplies Needed:

DCH1C

Copper wire in addition to the above will be needed.

Tools Needed:

  1. Wire Cutter
  2. Flat Nose Pliers

How to make Dangling Crystal Hoops:

Step 1:

Flatten the corner of the hoop using flat nose pliers.  This is done so the beads can be slid on the hoops.

DCH2

Step 2:

Slide two copper color seed beads on the hoop.

DCH3

Step 3:

Then slide a blue crystal bead followed by a copper seed bead.

DCH4

Step 4:

The diamond acrylic crystal bead is then slid.

DCH5

Keep sliding beads on the other side of the hoop in the same pattern.

Step 5:

Using flat nose pliers, bend the open end of the hoop in a right angle.

DCH6

Step 6:

Wrap the copper wire on the hoop. Use flat nose pliers for making these wraps.

DCH7

Step 7:

As shown here, wrap the copper wire on both sides of the hoop. Once the wrapping is done, cut off the excess wire using wire cutter.

The beads are secure because of this wire wrapping and the earrings also gets a different style.

DCH8

Step 8:

Repeat steps 1 to 7 for the other earring. Here is the completed pair of crystal hoops…

DCH9

Leave a Reply

Your email address will not be published. Required fields are marked *

*