You can make a pair of elegant pink jhumkas with bright magenta beads and silver spacer beads. Let’s quickly head over to the tutorial!!
How to make pink jhumkas with bead – Steps:
Supplies needed:
Tools Needed:
- Wire Cutter
- Round Nose Pliers
- Flat Nose Pliers
Step 1:
Insert a paper strip in a slotted quilling needle. Keep quilling till you make a tight coil of the desired size. Glue the end so that the coil is secure.
Slide and remove the coil from the slotted tool.
Using your finger gently push from the center of one side of the coil to form a cup like structure. Apply a coat of fabric glue on the inside of the cup and the outside. Allow it to dry. The quill will be secure now.Step 4:
Insert an eye pin from the bottom of the cup.
Step 5:
Insert the spacer bead from the top.
Now slide the pillow bead and the other spacer bead as shown.
Make a small loop at the top of the jhumka as shown. Round nose pliers have been used to make this loop.Step 8:
Insert fish hook ear wire in the loop made and the earring is done!
Thank you for the tutorial 🙂
Wonderful tutorial:) thank u cheers pavani
very nice ! good colour combinations,