How to make a Ribbon Rose with Satin

Satin ribbon roses are my favorite, these are simple to make and have an elegant look. Let’s see the procedure of making roses with satin ribbon. A few folds is all it takes!

Satin Ribbon Roses:

For this you will need:

1. Satin Ribbon
2. Floral Tape
3. Sewing thread
4. Needle
5. Metal String

How To:

Step 1:

Cut the satin ribbon with a length of about 30 cms.

Step 2:

Fold the ribbon at the center at a 90 degrees angle.

Step 3:

Start from the ribbon end pointing towards the left and bring it to the right in a horizontal manner.

Step 4:

Now take the ribbon end pointing downwards and fold it vertically to point upwards.

Step 5:

Repeat the above two steps, each time folding the ribbon to its opposite side such that the folds lie above the already made ribbon folds.

Step 6:

Make the folds till the end of the ribbon. Holding the last fold, when you let go of the remaining folds you would get a structure as shown:

Step 8:

Hold the last fold of the ribbon and gently pull one end such that a rose is formed.

Step 9:

Take sewing thread which is of the same color as the satin and stitch the folds together. A couple of stitches should be sufficient to hold the folds together.

Step 10:

Cut a piece of the metal string in a length of about 10 to 12 cms for the rose stem.

Step 11:

Wrap the green floral tape around the stem and use a little glue to make the tape stick to the stem.

Step 12:

Attach the stem to the rose using a suitable adhesive.

You can make a few more roses and make a a small button rose bouquet. Looks really elegant.

These satin button roses can also be used for embroidery and to add some sparkle to your children’s clothes.